Product ID:FLOWSOLDER ALLOYS
MSDS Date:01/29/1991
FSC:3439
NIIN:01-008-7580
MSDS Number: BMGYK

FEDERATED-FRY METALS INC DIV OF COOKSON AMERICA

6TH AVE AND 41ST ST
ALTOONA, PA 16602
US

Emergency Phone: 814-946-1611/CHEMTREC 800-424-9300

Info Phone: 814-946-1611/CHEMTREC 800-424-9300

Preparer: DON PORTER

Cage: 65172

WHITE PLAINS ELECTRICAL SUPPLY CO

ELMSFORD, NY 10523-3319 US

Telephone: 914-592-9555

Cage: 05085

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0 - 100%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0 - 100%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0 - 15%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 0 - 10%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: 0 - 60%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES:DUST/FUMES WILL BE AN
IRRITANT.SKIN:MAY CAUSE IRRITATION.INHALE:IRRITATION OF NOSE &
BRONCHIAL TRACTS MAY OCCUR.ORAL:ANTIMONY IS TOXIC.LEAD IS TOXIC &
CUMULATIVE.CHRONIC-MAY AFFECT KIDNEY,R EPRODUCTIVE & NERVOUS
SYSTEM.MAY CAUSE ANEMIA,INSOMNIA,WEAKNESS,IRRITABILITY,CONSTIPATION
& STOMACH PAINS.
Explanation of Carcinogenicity:CONTAINS LEAD
Effects of Overexposure:DUST/FUMES WILL BE AN EYE IRRITANT. MAY CAUSE
SKIN IRRITATION. INHALATION OF DUST/FUMES CAUSES IRRITATION OF NOSE
& BRONCHIAL TRACTS. ORALLY ANTIMONY IS TOXIC. LEAD IS TOXIC &
CUMULATIVE, AFFECT KIDNE Y, REPRODUCTIVE & NERVOUS SYSTEM. MAY
CAUSE ANEMIA, INSOMNIA, WEAKNESS, IRRITABILITY, CONSTIPATION &
STOMACH PAIN.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITIONS

First Aid:GET MEDICAL CARE. EYES: FLUSH WITH WATER FOR 15
MINUTES,HOLDING EYELIDS OPEN. SKIN:FOR BURNS,COOL WITH COLD WATER.
INHALATION: REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
INGESTION: IF CONSCIOU S, INDUCE VOMITING. GET MEDICAL HELP
IMMEDIATELY.

Flash Point:NONE
Extinguishing Media:DRY SAND, DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:LEAD FUMES

Spill Release Procedures:ALLOW TO SOLIDIFY AND COLLECT IN SEALED DRUMS
FOR DISPOSAL. NEVER USE ANY METHOD WHICH GENERATE DUST.

Handling and Storage Precautions:STORAGE-STORE IN DRY PLACE AWAY FROM
ACETYLENE,HYDROGEN PEROXIDE (DUE TO COPPER CONTENT).
Other Precautions:NO FOOD OR DRINK SHOULD BE ALLOWED IN AREA WHERE
THESE PRODUCTS ARE HANDLED. PERSONNEL MUST WASH THOROUGHLY AFTER
HANDLING THE METAL BEFORE DRINKING, EATING OR SMOKING. DO NOT
BREATHE FUMES/DUST. AVOI D CONTACT WITH EYES AND SKIN.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS, DUST/FUME
(HIGH EFFICIENCY FILTERS) OR BOTH IF TLVS ARE EXCEEDED.
Ventilation:LOCAL DUST PICK UP AND VENTILATION RECOMMENDED.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING.
Supplemental Safety and Health

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:360F,182C
Spec Gravity: 7 - 11
Solubility in Water:NIL
Appearance and Odor:SILVER TO GREY METAL, ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, REDUCING AGENTS, HALOGENS
Stability Condition to Avoid:FLAME
Hazardous Decomposition Products:TOXIC LEAD FUMES ABOVE 800 F

Waste Disposal Methods:RETURN TO SUPPLIER FOR REPROCESSING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.